eCatalogue 2026 — High Security (HVM / Crash Rated) Bollards

This catalogue covers high-security HVM (crash-rated) bollards in fixed and removable configurations, with two performance levels shown:
K4 and K12 equivalents.

Download / View this catalogue

View PDF
Download PDF

Core material: Steel (EN 10219 S355J). Finish: hot dip galvanizing (optional SS sleeve/cover).

How performance is presented in this catalogue

The catalogue lists two impact resistance levels: 700 kJ and 1800 kJ.
It also provides equivalency references to common international crash-test standards:

  • K4 equivalency: PAS 68 (7,500 kg @ 48 kph), IWA 14 (7,200 kg @ 48 kph), ASTM F2656 M30 (15,000 lb @ 30 mph).
  • K12 equivalency: PAS 68 (7,500 kg @ 80 kph), IWA 14 (7,200 kg @ 80 kph), ASTM F2656 M50 (15,000 lb @ 50 mph).

Quick selection (choose by installation type)

  • SDH — High Security Deep Fixed (below ground 500 or 650 mm).
  • SSH — High Security Shallow Fixed (below ground 200 mm).
  • RDH — High Security Deep Removable (above ground 900 mm, below ground 400 mm).
  • RSH — High Security Shallow Removable (above ground 1000 mm, below ground 200 mm).

Common specification pattern (what repeats across the range)

  • Core diameters shown: 219.1 mm (8″) and 273 mm (10″).
  • Optional SS sleeve/cover diameters: 273 mm (10″) and 323.9 mm (12″).
  • Core wall thickness: 30 mm (with optional sleeve thickness 6.35 mm noted).
  • Standard finish: hot dip galvanizing (optional SS sleeve).
  • Foundation requirement: “Must be installed within an approved, reinforced concrete foundation” (catalogue note).

Models and key numbers (from the catalogue tables)

SDH — High Security Deep Fixed (SDH1 / SDH2)

  • Above / below ground: 1000 mm above; 500 mm (SDH1) or 650 mm (SDH2) below.
  • Foundation (C40, not included): 600×600×600 mm (SDH1) or 600×600×750 mm (SDH2).
  • Impact resistance: 700 kJ (SDH1) / 1800 kJ (SDH2).

SSH — High Security Shallow Fixed (SSH1 / SSH2)

  • Above / below ground: 1000 mm above; 200 mm below (both).
  • Core wall thickness: 30 mm (optional sleeve 6.35 mm).
  • Impact resistance: 700 kJ / 1800 kJ.

RDH — High Security Deep Removable (RDH1 / RDH2)

  • Above / below ground: 900 mm above; 400 mm below (both).
  • Foundation (C40, not included): 600×600×600 mm or 600×600×750 mm.
  • Impact resistance: 700 kJ / 1800 kJ.
  • Operational note: “Designed to be removed only using the designated lifting tools.”

RSH — High Security Shallow Removable (RSH1 / RSH2)

  • Above / below ground: 1000 mm above; 200 mm below (both).
  • Finish: hot dip galvanizing (optional SS sleeve).
  • Impact resistance: 700 kJ / 1800 kJ.

Installation notes (important)

Foundation requirement: Must be installed within an approved, reinforced concrete foundation (catalogue note).
Removable models: Designed to be removed only using the designated lifting tools (catalogue note for RDH).

Need a quotation or model shortlisting?

Send us: (1) model family (SDH / SSH / RDH / RSH), (2) target performance level (K4-equivalent or K12-equivalent),
(3) preferred finish (galvanized core only or optional SS sleeve), and (4) your slab/foundation constraint (shallow vs deep).

Request a quotation